KeiSei84
1dd4bad97a
Root causes found by reproducing a clean install from keigit:
1. PROFILE_PRIMS resolved only inside check_prereqs → unbound for
--no-execute (plan showed 0 prims for every profile) and silently
empty for --skip-prereqs. Now resolved unconditionally in install.sh
before any reader (SSoT).
2. Every profile (even minimal, advertised "no Rust compile") fell back
to a 5-15 min `cargo build --workspace` because no prebuilt release
binaries exist. Auto-set KEI_SKIP_RUST for profiles with no rust
primitives → minimal installs in ~18s (assembler only). cargo stays a
hard prereq because the agent assembler always compiles.
3. The assembler aborted the WHOLE install on any single bad manifest
(set -e). generate_agents is now tolerant: bad manifests print FAIL
but hooks/skills/settings still land. Commit-time validate stays strict.
4. Data bugs that broke the assembler:
- duplicate [taxonomy] table in _roles/{auditor,merger}.toml
- fal-ai-runner handoff → keimd-expert (not shipped in kit)
- infra-implementer-cicd forbidden_domain literal `${{ secrets.NAME }}`
collided with assembler ${{ }} placeholder detection
5. Metadata: KeiSei84 (nonexistent GitHub org) → KeiSeiLab/KeiSeiKit-1.0
across plugin manifests, bootstrap, README, docs, Cargo/npm metadata.
.claude-plugin/{plugin,marketplace}.json 0.16.0 → 0.38.0. SECURITY.md
supported version 0.14.x → 0.38.x.
feat: ship KeiSei tamagotchi statusline into the kit
- scripts/keisei-pet{,-update}.sh (portable, state under ~/.claude/pet/)
- install copies them to ~/.claude/scripts/
- settings-snippet adds statusLine (set-if-absent, never clobbers an
existing one) + 4 pet-update hooks (prompt/rust_write/github_block/sleep)
Verified: clean minimal install RC=0, zero FAIL, 38 agents + 52 hooks +
68 skills, settings valid, statusLine wired, pet renders, idempotent re-run.
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
86 lines
5.4 KiB
Markdown
86 lines
5.4 KiB
Markdown
# KeiSeiKit — Anthropic Claude Code plugin format
|
|
|
|
This document describes the plugin-format install path (v0.16+) and how it relates to the classic `./install.sh` path. Both paths are supported; use whichever fits.
|
|
|
|
## TL;DR
|
|
|
|
```bash
|
|
# One-time
|
|
/plugin marketplace add KeiSeiLab/KeiSeiKit-1.0
|
|
# Install
|
|
/plugin install keisei@keisei-marketplace
|
|
```
|
|
|
|
The plugin auto-registers: agents, skills, hooks, and the MCP server. No manual `~/.claude/settings.json` edits. No `install.sh` needed for the core (non-primitive) experience.
|
|
|
|
## Layout
|
|
|
|
The repo follows the [Anthropic Claude Code plugin spec](https://code.claude.com/docs/en/plugins):
|
|
|
|
```
|
|
.claude-plugin/
|
|
plugin.json # plugin manifest (name, version, author, license, keywords)
|
|
marketplace.json # marketplace manifest — lets this repo serve as a marketplace source
|
|
mcp-template.json # template for .mcp.json (copy to repo root; see "MCP prerequisite" below)
|
|
agents/ # auto-discovered by Claude Code at plugin-install time
|
|
skills/<name>/SKILL.md # auto-discovered
|
|
hooks/hooks.json # PreToolUse / PostToolUse / Stop hooks with ${CLAUDE_PLUGIN_ROOT} paths
|
|
.mcp.json # MCP server registration (see prerequisite note)
|
|
```
|
|
|
|
Paths inside `hooks/hooks.json` use `${CLAUDE_PLUGIN_ROOT}` (expanded by Claude Code at runtime to the plugin install directory) rather than absolute `$HOME/.claude/hooks/...` paths. This lets the same hooks ship unchanged whether the plugin is installed from GitHub, npm, or a local path.
|
|
|
|
## Plugin install vs classic install — what differs
|
|
|
|
| Feature | Plugin install | Classic `./install.sh` |
|
|
|---|---|---|
|
|
| Agents registered | yes, automatic | yes, copied to `~/.claude/agents/` |
|
|
| Skills registered | yes, automatic | yes, copied to `~/.claude/skills/` |
|
|
| Hooks wired | yes, via `hooks/hooks.json` | requires `--activate-hooks` (jq-merge of `settings-snippet.json`) |
|
|
| MCP server | yes, via `.mcp.json` (uses `@keisei/mcp-server` from keigit.com — requires `~/.npmrc` setup, see below) | same |
|
|
| 47 Rust primitives | **no** — plugin ships manifest sources only; no cargo build | yes, `--profile=<name>` builds the selected set |
|
|
| 13 shell primitives | **no** | yes, copied to `~/.claude/agents/_primitives/` |
|
|
| Disk footprint | ~2 MB (plugin cache) | ~2 MB minimal up to ~200 MB full |
|
|
| Update path | `/plugin update keisei` | `git pull && ./install.sh` |
|
|
| Update visibility | Claude Code shows version change | silent |
|
|
|
|
**Bottom line:** plugin install is the right default for the agent-kit experience (agents + skills + hooks). For the Rust primitives (`tomd`, `kei-ledger`, `provision-hetzner`, `kei-migrate`, etc.), fall back to the classic installer or run it alongside the plugin — the two don't collide because the plugin namespaces into its own install dir and the classic installer writes to `~/.claude/`.
|
|
|
|
## Prerequisites
|
|
|
|
**For plugin install:**
|
|
- Claude Code 2.1+ (check with `claude --version`)
|
|
- Network access to `github.com/KeiSeiLab/KeiSeiKit-1.0` on `/plugin marketplace add`
|
|
|
|
**For the MCP server subset:**
|
|
- `@keisei/mcp-server` available from **keigit.com**
|
|
(`https://keigit.com/api/packages/keisei/npm/`). One-time `~/.npmrc` setup:
|
|
```
|
|
@keisei:registry=https://keigit.com/api/packages/keisei/npm/
|
|
//keigit.com/:_authToken=<keigit PAT with read:package>
|
|
```
|
|
Without the `~/.npmrc` rows, `npx` cannot resolve the scoped
|
|
package and the `keisei` MCP server simply won't appear in your
|
|
tool list — the agents, skills, and hooks all work without it.
|
|
- Node.js 18+ (for `npx` to fetch the server on demand)
|
|
|
|
**For the Rust primitives (classic install only):**
|
|
- Rust stable, `jq`, plus the soft-deps listed in the main README per-profile table.
|
|
|
|
## Known limitations
|
|
|
|
1. **Rust primitives not auto-installed.** The plugin format doesn't currently express "also run `cargo build` at install time". We ship the manifest sources in-repo so that users who want the primitives can run `./install.sh --profile=full` alongside the plugin. A future version may add pre-built release binaries for common platforms (macOS arm64/x86_64, Linux x86_64) into `bin/` so the plugin can ship primitives without a cargo step.
|
|
2. **`@keisei/mcp-server` lives on keigit.com, not npm.org.** The `.mcp.json` entry uses `npx -y @keisei/mcp-server` which resolves through the `~/.npmrc` `@keisei:registry` line above. Without that line, `npx` will hit npm.org by default and 404. See `_ts_packages/packages/mcp-server/README.md` for the publish pipeline.
|
|
3. **Hooks use `${CLAUDE_PLUGIN_ROOT}`.** This is the official Claude Code plugin variable. Older Claude Code versions (<2.1) that predate plugin support will not expand this variable — stick with classic install on those versions.
|
|
4. **No version-pinning yet.** `/plugin install keisei@keisei-marketplace` installs the default branch HEAD. For reproducible team installs, add the `--ref=<tag>` flag once it lands in Claude Code (currently in the spec per the extension schema `ref` field).
|
|
|
|
## Feedback & bugs
|
|
|
|
Open an issue at [github.com/KeiSeiLab/KeiSeiKit-1.0/issues](https://github.com/KeiSeiLab/KeiSeiKit-1.0/issues). A well-formed problem description is already half the solution.
|
|
|
|
## References
|
|
|
|
- [Anthropic Claude Code plugins docs](https://code.claude.com/docs/en/plugins)
|
|
- `README.md` — main install guide (plugin section is the new default)
|
|
- `settings-snippet.json` — retained for classic install; the plugin path does not use it
|
|
- `install.sh --help` — classic installer options, now with a plugin-first banner
|